plastic viscosity
英 [ˈplæstɪk vɪˈskɒsəti]
美 [ˈplæstɪk vɪˈskɑːsəti]
网络 塑性黏度; 塑性粘度; 塑粘性; 黏滞度
双语例句
- This equipment is to understand the production process of plastic viscosity glue is smooth and ease the vacuum condensate collection of controlling a special energy-saving equipment.
本设备是为了解化胶生产工艺的胶液粘稠度，是缓和真空负压平稳及冷凝水收集控制作用的一种专用节能型配套设备。 - The results show that the coatings with good application properties have larger apparent viscosity, higher yield stress, lower plastic viscosity and proper thixotropy at lower shear rate.
实验结果表明，使用性能良好的锭模耐火涂料在低剪切条件下，应具有较大的表现粘度与屈服应力，以及较小的塑性粘度和适当的触变性。 - The effect of the yield stress and plastic viscosity on the two-phase flow is studied. Study on Bingham yield stress of hyperconcentration fluid
随着屈服应力的增加，宾汉流体与颗粒相速度的主流速度减小。宾汉极限切应力的研究 - Mapping rheogram and analyzing thixotropy of fresh cement paste with different superplasticizers by measuring the rheologic parameters such as shearing stress 、 yield stress and plastic viscosity.
通过测定不同新拌水泥浆体的剪切应力、屈服应力、塑性粘度等流变参数，绘制流变曲线，分析含不同高效减水剂的新拌水泥浆体的触变性。 - The relation ship between apparent viscosity, plastic viscosity and temperature, pressure derived from regression can be used in the selection of mud additives.
同时，本文回归出的各处理剂溶液的表观粘度和塑性粘度随温度和压力的数学模型可直接用于指导设计钻井液配方时的各处理剂筛选。 - A pipeline conveying method with viscosity plastic material is put forward. A earth construction equipment for conveying silt and soft clay in a long distance with high concentration, big viscosity and lower water content is developed.
提出一种粘塑性物料管道输送方法，研制了能远距离输送高浓度、大粘度、低含水量的淤泥和软粘土又不污染环境的土方施工设备。 - The result shows that the flame retardant PS possesses the features of pseudo plastic fluid, its apparent viscosity(η_a) decreases as the shear rate or the temperature rises.
结果表明：阻燃PS熔体表观黏度（ηn）随剪切速率的增大而减小、随温度的升高而降低，具有假塑性流体的特性； - The preparation of anti-freezing adhesive of low-toxicity, low cost and super performance from recovered polystyrene plastic foam, and the emulgents, viscosity increasing agents mixed solvents with low toxicity were introduced in this paper, The process conditions are simple.
本文研究了以废聚苯乙烯泡沫塑料为主要原料，选择低毒性混合溶剂、增粘剂、乳化剂，制得低毒性、低成本、性能好的抗冻胶粘剂。 - Contrary to traditional workability test methods, the test apparatus designed in this paper are convenient to measure the concrete rheological parameters, which are yield stress and plastic viscosity.
与传统的工作性测试方法不同，应用本装置，可以方便的测试出混凝土的两个流变参数：屈服应力和塑性粘度。 - Plastic dashpots reflecting the material transient response and Newton dashpots mirroring the material viscosity are introduced to describe the viscoplasticity of slip systems.
在晶体滑移系上引入与材料即时响应有关的塑性阻尼器及与材料粘性有关的牛顿阻尼器以计及材料滑移系的粘塑性特性。 - Under identical water content, the yielding shear stress and plastic viscosity reduce with increasingly better particle grading and thus higher packing density of granular mixture;
在相同用水量条件下，随着固体颗粒体系堆积密实度的提高，颗粒级配的改善，新拌浆体的屈服剪应力和塑性粘度都有不同程度的降低，浆体经时损失也减小。 - In addition, the plastic viscosity model, rheology theory and numerical calculation method is also studied initially.
此外，还对塑料的黏度模型、流变理论及数值计算方法等方面进行了初步研究。 - Temperature/ Pressure Relationships of Yield Stress and Plastic Viscosity for Foamed Drilling Fluids
泡沫钻井流体动切力和塑性粘度的温度压力关系 - The results show that, with the increase of PAM quantity, divergence of the paste gets larger earlier and smaller later, the yield point stress keeps on increasing, and the plastic viscosity increases rapidly initially, drops latter, and increases smoothly.
试验研究表明，随聚丙烯酰胺掺量的逐渐增大，水泥浆体的扩展度先增大后减小，屈服剪切应力持续增大，塑性粘度先急剧增大、后减小、再稳步增长。 - The results indicate that the magnetization can obviously change the properties of the foam drilling fluid and reduce the plastic viscosity and visual viscosity of the magnetized foam drilling fluid.
结果表明，磁处理能明显改变泡沫钻井液的性能，可以使塑性粘度和视粘度减小。 - The influence of mud property, such as apparent viscosity, plastic viscosity and mud property, on the cleaning of high deviated hole.
在文献调研的基础上，对泥浆性能影响环空岩屑运移进行了实验研究。讨论了动塑比、表观粘度、塑性粘度、有效粘度、泥浆密度等因素对无因次岩屑床面积的影响。 - Energy Method of Plastic Shaping Under Condition Transient State and Viscosity
瞬态与粘性效应下的材料成形能量法 - The key factors are the ratios of yield point to plastic viscosity of both drilling muds and cement slurries and the pressure gradient of displacement flow.
影响偏心环空注水泥顶替效率的关键因素是泥浆、水泥浆的动塑比和顶替流动压力梯度。 - The pres-sure loss in annular increases as Bingham plastic viscosity increases;
随宾汉塑性粘度增加，环空压耗增加； - With the increase of silica fume addition ( 1~ 3%), the relative yield stress, the relative plastic viscosity and thixotropy were decreased.
硅灰加入量（0~4%）增加，浇注料的相对屈服应力、相对塑性粘度和触变性均随之降低。 - Along with the thickness of mortar coating layer increases, the plastic viscosity increases, the yield stress decreases.
随着砂浆包裹层厚度的增加，自密实混凝土的塑性粘度逐渐增大，屈服应力逐渐减小。 - The research on concrete had shown that the filling coefficient had more effect on the yield stress than on the plastic viscosity coefficient.
研究发现填隙系数对屈服应力影响较明显，对塑性粘度系数影响较小。 - The phenomenon of increasing shear force, and decreasing apparent viscosity, showed that it was a kind of Pseudo plastic Fluid. As the temperature increased, the apparent viscosity decreased.
表观粘度测定显示辛烯基琥珀酸淀粉酯具有剪切变稀现象，属于假塑性流体，表观黏度随着温度升高而下降。 - With the increase of slurry concentration and silica fume content ( 0 to 12%), the yield stress, plastic viscosity and thixotropy of slurries were increased significantly.
且随浆体浓度和硅灰加入量（0~12%）增加，浆体的屈服应力、塑性粘度和触变性都明显增大。 - The fluid mechanics theory as a foundation, constructing plastic material flow model of the friction stir welding with the plastic material as high viscosity non-newtonian incompressible fluid.
以流体力学理论为基础，构建搅拌摩擦焊焊接过程中塑性材料的流动模型，建模时将塑性材料看成高粘度、非牛顿、不可压缩流体。 - As the extension of static stop time, the thixotropy of SCC decreases slowly, the yield shear stress increases and the plastic viscosity decreases.
随着静停时间延长，自密实混凝土的触变性逐渐下降，屈服剪切应力增加，塑性粘度减小。 - The results shown that the viscosity of a kind of magnesium salt being added 0.7% modified fiber Brucite in the water was not so good as asbestos slurry, but its ratio of yield stress to plastic viscosity is better than asbestos slurry.
结果表明，在一种改性纤维水镁石中加入0.7%的镁盐虽然在清水中达不到石棉浆液的粘度，但是动塑比却要高于石棉浆体。 - With temperature rising, the plastic viscosity and yield strength of paste become smaller, and the slurry rheological property is sensitive to temperature. ( 3) Studying the composition distribution ratio of biodegraded cushion packaging materials and its influence on cushioning performance.
随温度的升高，浆料塑性粘度和屈服力都变小，浆料流变性对温度较敏感。